Heat Sealed Transparent Blister Packaging
The describle of heat Sealed Transparent Blister For Bread Clamp Packaging
Heat Sealed Transparent Blister For Bread Clamp Packaging are mainly made of high-quality plastic materials such as PVC, PET, PP, PS, GAG, and velvet.It is protective, transparent and intuitive, easy to use, and light in quality.
The describle of heat Sealed Transparent Blister Packaging
Q1:What's a crystal dot? How do we solve problems?
A:The crystal point is a point on the suction packaging material, which will seriously affect the appearance of the suction packaging product. The quality problem comes from the sheet material supplier. This reason is that when the sheet material is produced, there is a mixture of debris in the material. In, This kind of quality situation will occur. The solution is to inspect the sheet material before producing the plastic packaging product.
Q2:How is thinness not uniform caused? How to solve such a problem?
A:There are the most common points of uneven thickness, such as shelf, sheet material, and temperature. The adjustment of the position when the upper shelf is pressed into the plastic packaging product is very critical. If there is a dislocation or unreasonable placement, the thickness will be uneven. What is related to the sheet material is that the sheet material did not adjust the thickness during the production process, so it will lead to such a quality problem. Temperature adjustment is also directly related, and the temperature must be adjusted according to the different materials of different molds.
Q3:What's the cable? How did it happen? What's the solution?
A:The drawing line is a line that will appear protruding on the edge of the product and seriously affects the appearance of the packaging. The reason for the formation is that this situation is related to the structure manufacturing of the suction mold, the control operation of the suction molding machine, and the temperature adjustment., There is a great deal of relationship between the upper shelf, the solution is the quality control of the mold, the adjustment of the machine and temperature parameters, the upper shelf extrusion and so on.
Q4:What are water ripples and bubbles? How did it happen? What's the solution?
A:Water ripples and bubbles are watermarks and bubbles on the surface of the material. Such plastic A:products will directly affect the appearance of the packaging items and reduce the appearance of the packaging. The water ripples are caused by the relationship between the film makers. In the process of production, there are water ripples that are related to the speed and slowness of the film production. The reason for the bubbles is that the temperature is too high during the production of the sheet material or it is caused by the mixed production of the sheet material or the infiltration of air during the production of the sheet material.
Q5:What's the scratch? How does this quality problem come about? What's the solution?
A:Scratching is the appearance of scratch on the surface after the production of plastic products. It is also a problem that often occurs in quality. The reason for this is that in the process of production, there are more manual processes and friction occurs easily. The operation mode of punch and packing staff is the most critical link. The solution is to handle the product with care, keep the work table clean and hygienic, staff wear gloves and other related matters, but also can effectively prevent the situation of scraping, suction plastic packaging products have more manual processes, so in each link must be closely watched. In order to avoid the production of defective products.